Using your Tenda router as an access point is one of the simplest and most economical ways to increase the coverage of your home or business network without having to deal with the inconvenience of installing additional cables or buying pricey equipment. This tutorial will take you step-by-step through the process of configuring a Tenda Router as Access Point, guaranteeing uninterrupted connectivity, and improving network stability.
Even if you’re not a computer expert, this post will make the process of setting up a Tenda Router as Access Point easy and uncomplicated, regardless of your goals: improving internet connection in several rooms or getting rid of Wi-Fi dead zones.
Why setup Tenda Router as Access Point?
Your devices may connect to the same network without any disruptions or congestion thanks to an access point. You may do the following by turning your current Tenda router into an access point:
- Extend wireless coverage to places where the signal is weak or nonexistent.
- Reduce the amount of traffic on your primary router to increase network performance
- Give several devices consistent connection.
- Do not buy additional networking hardware.
- It is therefore perfect for common areas, offices, and large residences.
Prerequisites for configure Tenda Router as Access Point
Make sure you have the following before beginning the Tenda router setup:
- A functional main router with an internet connection.
- You wish to set up a backup Tenda Router as Access Point.
- A LAN wire to physically link the routers.
- A laptop, smartphone, or tablet that can access tendawifi com to access the Tenda admin interface.
Now that you have these, you may go forward.
Detailed Instructions for Setting Up a Tenda Router as Access Point
1. Reset the Tenda Router (Suggested but optional)
Before setting up your Tenda router as an access point, it is advisable to restore it to its original configuration if it has been used previously. By doing this, conflicts with previous settings are avoided.
- Locate the router’s Reset button.
- Press and hold it for roughly 10 seconds with a paperclip or alike instrument.
- Await the router’s restart.
- By doing this, all settings will be cleared and you may begin over.
2. Attach the Tenda router.
- Connect a power supply to the Tenda router.
- Connect your computer or smartphone to a LAN port on the Tenda router using a LAN cable.
- Launch a browser, then navigate to tendawifi.com.
- The router will ask you to either log in or establish a password. Access the admin panel by following the directions.
3. Turn off the Tenda router’s DHCP.
Make sure the Tenda router doesn’t assign IP addresses when you set it up as an access point; your primary router should be in charge of this.
- Navigate to the router’s web interface’s Advanced Settings or LAN Settings.
- Locate the option for DHCP Server.
- Turn the DHCP server off.
- Save the changes.
- By taking this step, IP disputes are avoided.
4. Assign an IP address that is static.
Next assign an IP address that is outside of your main router’s DHCP range but within the alike subnet.
For instance:
- You may setup the Tenda router IP to 192.168.0.2 if your main router IP is 192.168.0.1 and its DHCP range is 192.168.0.100 to 192.168.0.200.
- Go to LAN Settings.
- Put in the IP address that is static.
- Save the configuration.
In this manner, you may subsequently use the Tenda router without encountering any issues.
5. Attach the routers.
- One of the LAN ports on your chief router should be connected to one of the LAN ports on the Tenda router using a LAN cable. The WAN port should not be used.
- The access point is integrated onto your current network through this physical link.
6. Configure Wi-Fi
Configuring the wifi settings is the next step.
- Navigate to Wireless Settings.
- Configure the network name and keyword. To facilitate smooth flow, you can pick the same router as your chief router or specify an unlike one to identify access point.
- Select the correct WiFi band, such as 2.4 GHz or 5 GHz, if obtainable.
- Save the configuration.
Your Tenda router is now broadcasting Wi-Fi as an access point after completing this step.
7. Examine the Configuration
After the setup is finished:
- Use your devices to disconnect and rejoin to the Wi-Fi network.
- Verify the signal strength and internet connectivity.
- To view the settings and make sure everything is functioning properly, go to tendawifi com.
- You should experience smooth connectivity and better coverage if it is configured aptly.
Tips for Troubleshooting
- Try using 192.168.0.2 (or the IP you specified) in your browser if you are unable to access tendawifi com.
- During setup, confirm that you are linked via LAN.
- If you’re experiencing glitches logging in, temporarily disable firewalls or VPNs.
- If the changes don’t happen right away, restart both routers.
Concluding remarks
An easy approach to increase the reach of your network without investing in additional hardware is to set up your Tenda Router as Access Point. You can quickly set up your Tenda router as an access point, increase Wi-Fi coverage, and offer dependable internet access throughout your house or place of business by reading this tutorial.
You’ll experience better coverage, quicker speeds, and a more dependable connection wherever you need it when the setup is finished.
FAQs
Do I need to disable DHCP when using Tenda router as an access point?
In order to prevent IP address conflicts and enable your primary router. This will help to issue addresses and effectively administer the network. You must disable DHCP on the Tenda router.
Does using Tenda router as an access point improve Wi-Fi coverage?
Yes, you may increase Wi-Fi coverage, remove dead zones, and offer dependable internet access. You can easily access the locations that are away from the main router by configuring your Tenda Router as Access Point.
Can I use a Tenda router as an access point with any ISP modem?
Yes, as long as you connect via LAN and turn off DHCP to prevent conflicts. You may use a Tenda Router as Access Point with any ISP modem.
How do I switch my Tenda router back from access point mode to router mode?
To return the Tenda router to router mode, either manually activate DHCP and set up WAN settings in the admin panel. Or reset it to factory defaults.